Messages In This Digest (4 Messages)
- 1a.
- transmitter From: tetonfolks
- 1b.
- Re: transmitter From: Bill Adams
- 1c.
- Re: transmitter From: tetonfolks
- 1d.
- Re: transmitter From: Barb Nolley
Messages
- 1a.
-
transmitter
Posted by: "tetonfolks" tetonfolks@yahoo.com tetonfolks
Wed May 9, 2012 6:55 am (PDT)
Finally I have a problem for the first time in 10 years of traveling. I just set up in a new location, aced the satellite (99 West),used Dons Point 4020 program, the modem rebooted and I ended up with 4 lights. The system light did not come up. I opened the modem page and found a flag on the TCP Op Status (Not Operational) Looked further and found I was not transmitting. I have switched the arm and transmitter, replaced cables and some connectors, rebooted the modem several times and nothing changed. I consulted my guru and he thinks it's the modem. Anybody have any additional thoughts? Thanks, John Ess
- 1b.
-
Re: transmitter
Posted by: "Bill Adams" Bill@internetanywhere.us r_v_satellites
Wed May 9, 2012 7:04 am (PDT)
More likely it's just a Hughes issue. Where are you currently located?
Have you tried using Don's current tools instead of the old 4020? DSSatTool
and PC-OPI?
Have you tried doing a force ranging routine?
From: RVInternetBySatellite@yahoogroups. com
[mailto:RVInternetBySatellite@yahoogroups. ] On Behalf Of tetonfolkscom
Sent: Wednesday, May 09, 2012 6:56 AM
To: RVInternetBySatellite@yahoogroups. com
Subject: [RVInternetBySatellite] transmitter
Finally I have a problem for the first time in 10 years of traveling. I just
set up in a new location, aced the satellite (99 West),used Dons Point 4020
program, the modem rebooted and I ended up with 4 lights. The system light
did not come up. I opened the modem page and found a flag on the TCP Op
Status (Not Operational) Looked further and found I was not transmitting. I
have switched the arm and transmitter, replaced cables and some connectors,
rebooted the modem several times and nothing changed. I consulted my guru
and he thinks it's the modem. Anybody have any additional thoughts? Thanks,
John Ess
[Non-text portions of this message have been removed]
- 1c.
-
Re: transmitter
Posted by: "tetonfolks" tetonfolks@yahoo.com tetonfolks
Wed May 9, 2012 9:08 am (PDT)
I have tried force ranging with no success as it will not transmit. The 4020 has always worked fine so I've left it in place. Lastly, I really would like to think it's a Hughes issue but I've been sitting on it for 2 days now with no changeand I'm very reluctant to do the India dance. Thanks Bill for your prompt response....John Ess
--- In RVInternetBySatellite@yahoogroups. , "Bill Adams" <Bill@...> wrote:com
>
> More likely it's just a Hughes issue. Where are you currently located?
> Have you tried using Don's current tools instead of the old 4020? DSSatTool
> and PC-OPI?
>
> Have you tried doing a force ranging routine?
>
>
>
> From: RVInternetBySatellite@yahoogroups. com
> [mailto:RVInternetBySatellite@yahoogroups. ] On Behalf Of tetonfolkscom
> Sent: Wednesday, May 09, 2012 6:56 AM
> To: RVInternetBySatellite@yahoogroups. com
> Subject: [RVInternetBySatellite] transmitter
>
>
>
>
>
> Finally I have a problem for the first time in 10 years of traveling. I just
> set up in a new location, aced the satellite (99 West),used Dons Point 4020
> program, the modem rebooted and I ended up with 4 lights. The system light
> did not come up. I opened the modem page and found a flag on the TCP Op
> Status (Not Operational) Looked further and found I was not transmitting. I
> have switched the arm and transmitter, replaced cables and some connectors,
> rebooted the modem several times and nothing changed. I consulted my guru
> and he thinks it's the modem. Anybody have any additional thoughts? Thanks,
> John Ess
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
- 1d.
-
Re: transmitter
Posted by: "Barb Nolley" bjnolley@mobileinternetsatellite.com bjnolley2
Wed May 9, 2012 9:16 am (PDT)
If it won't transmit, then focus on your transmit side: transmit cables and
connectors, transmitter, and finally, the modem.
Barb
MobileInternetSatellite.com
From: RVInternetBySatellite@yahoogroups. com
[mailto:RVInternetBySatellite@yahoogroups. ] On Behalf Of tetonfolkscom
Sent: Wednesday, May 09, 2012 9:08 AM
To: RVInternetBySatellite@yahoogroups. com
Subject: [RVInternetBySatellite] Re: transmitter
I have tried force ranging with no success as it will not transmit. The 4020
has always worked fine so I've left it in place. Lastly, I really would like
to think it's a Hughes issue but I've been sitting on it for 2 days now with
no changeand I'm very reluctant to do the India dance. Thanks Bill for your
prompt response....John Ess
--- In RVInternetBySatellite@yahoogroups. com
<mailto:RVInternetBySatellite% 40yahoogroups. com> , "Bill Adams" <Bill@...>
wrote:
>
> More likely it's just a Hughes issue. Where are you currently located?
> Have you tried using Don's current tools instead of the old 4020?
DSSatTool
> and PC-OPI?
>
> Have you tried doing a force ranging routine?
>
[Non-text portions of this message have been removed]
Need to Reply?
Click one of the "Reply" links to respond to a specific message in the Daily Digest.
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Individual | Switch format to Traditional
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
No comments:
Post a Comment